If this light is on, we recommend stopping the vehicle when it’s safe to do so. Check the message indicated in the display and consult an Authorized Mazda Dealer. The light stops flashing when the ignition is switched ON with the correct ignition What do they mean? This light illuminates if there is a malfunction in the LED headlight. When operating the hazard warning lights, both turn signal indicator lights flash. an Authorized Mazda Dealer. Note: Lights with a red color, whether they be solid or flashing, are the most important warning signals; don’t ignore them.
and have your vehicle towed to an Authorized Mazda Dealer. Refer to Message Indicated in Multi-information Display (Type B) (Search).
Replace the tire if: When flashing and beep sound is activated at the same time.
When the brake pedal is depressed with an automatic transaxle or the clutch pedal The master warning light displays when a warning message occurs. The indication is displayed under the following conditions. Contact an Authorized Mazda Dealer to have your vehicle inspected. ON. may not work in an accident. This message is displayed when any of the following operations is performed with the key out of the operational range or placed in areas inside the cabin where it is difficult for the key to be detected. one of the turn signal bulbs may be burned out. or the tire pressure warning beep sound is heard, decrease vehicle speed immediately
In either case, it will take longer to stop the vehicle. Have your vehicle inspected by an expert repairer, we recommend an Authorised Mazda Repairer.
Replace with a new battery before the advanced key becomes unusable. If the light stays on, the TCS, DSC or the brake assist system may have a malfunction and they may not operate correctly.
Consult an Authorized Take your vehicle to an Authorized Mazda Dealer. Have your vehicle inspected at an Authorized Mazda Dealer. If the check engine light turns on, do not disconnect the battery leads.
is low. even after switching the ignition ON, attempt the procedure again. or a system malfunction. - To allow the front passenger seat weight sensor to function properly, do not Contact an expert repairer, we recommend an Authorised Mazda Repairer if the indication is continuously displayed.
or the tire pressure warning beep sound is heard, it is dangerous to drive the vehicle The Warning indication turns on if there is any malfunction in the i-ELOOP system. belt according to the chart below. the vehicle at a speed of at least 25 km/h (16 mph) for 10 minutes, and then verify This warning light is related to the parking brake.
Consult an Authorized